Skip to main content

Approve or Reject a Material Request

When a field request needs sign-off before it is ordered: approve it, reject it with a reason, or hand it to another approver or a backup.

Written by Gabby Gutman

On projects that review material requests, a request waits for an approver before anything is ordered. This is how an approver approves it, rejects it with a reason, or hands it to someone else.

Before you start

  • Your company must have material request approval turned on. Ask your Admin, or contact us.

  • The project must have Request approval switched on in its settings, with at least 1 request approver. An Admin sets this up.

  • You need the Can approve material request permission, and you must be an approver on the request.

Steps

  1. Open the request from your notification, or from the Requests tab under Orders.

  2. To see only yours, filter to Awaiting My Approvals or choose the My approvals view. Which one you see depends on your list layout.

  3. Check the lines, quantities, dates and cost codes. You can edit them before you decide.

  4. Click Approve.

  5. If the Approve Request window opens, pick the person under Assign purchaser, then click Approve & Assign.

  6. To send it back instead, click Reject.

  7. Type what needs to change under What needs to change?, then click Reject material request.

If you can also place orders, the approve button may offer Approve & Order. It approves the request and takes you straight to the order it creates. It appears only when the request will become a single order. The button remembers which of the 2 you used last.

What happens next

  • Approved: the request is turned into orders straight away, and into an inventory request for anything drawn from a warehouse. Its status becomes Submitted and the page reads This request has been approved. The original request is shown below in read-only mode. The requester is notified.

  • Rejected: its status becomes Rejected, and the request shows who rejected it, when, and the reason. The requester is notified, with the reason. Nothing is ordered.

  • The requester, or an approver on the request, clicks Restore on a rejected request to send it back. It returns to Awaiting Approval.

When the approver is away

  • While a request is awaiting approval, the requester or anyone who can approve requests can click Change approver. Choose the new approver under New approver(s) and give a reason.

  • A backup approver sees Approve on behalf and Reject on behalf. They must choose a reason, such as Approver out of office, and it is kept in the request history.

  • If the approver has been deactivated, the request says so in red. Use Change approver to move it on.

Notes and limits

  • A rejection needs a reason of at least 3 characters. Reject material request stays greyed out until you type one.

  • Every material must be matched to a catalog item, or approved into the catalog, before you can approve. If one is not, SubBase scrolls to the line and says how many still need it.

  • Once approved, the materials on the request cannot be changed. Comments, contacts and attachments still work.

  • If request approval is on for a project but nobody is set as a request approver, requests on that project cannot be sent. The request page says so and links to the project settings.

Best practices

  • Fix a small mistake yourself rather than rejecting. You can edit the request before you approve it. A rejection stops everything until the requester restores it and it comes back to you.

  • Write the reason as the change you need, such as "Split the rebar onto its own request". The requester reads it in the notification and on the request, and it is all they get.

  • Match unfamiliar materials to the catalog before you click Approve. Approval is refused until every line is matched or approved into the catalog.

  • Turning Request approval off on a project does not release requests already waiting. They finish under the old rules, so approve or reject them first.

If this doesn't work

Start a chat from the Messenger in the bottom-left of this page, or email [email protected]. Include the order or project number and what you expected to happen.

Related

Did this answer your question?